Titan 38

Capacity: 53,000 ft-lb off the back and 43,000 ft-lb on the sides
Body Configurations: 9′ (60″ CA) Standard:
11′ (84″ CA) Standard:
121.8 cu/ft (3.45 cu/m)
84″ Tall — 127.2 cu/ft (3.60 cu/m)
Applicable Service Cranes: 2003, 3203H, 3203EH, 4004EH, 5005EH, 6006EH, HC-6, HC-7, HC-7x, HC-8 and HC-8x
Outriggers: Hydraulic or Manual Stabilizer/Outrigger

 

Category: Tags: , , , , , , ,

9′ and 11′ Service Bodies for Class 4 and 5 Trucks

Compatible with the HC-8x and smaller cranes

Features / Benefits
Heavy-duty performance and extended service life:

  • Patented one-piece 10 gauge (3.6mm) side-pack design for rugged, off-road use minimizes weld seams for less cracking and rust
  • 12 gauge (2.8mm) tread plate on tops and cargo area for added durability
  • Integral crane box transfers load directly to outriggers reducing stress on the chassis — reinforced up to 38,000 ft lb (5.3 tM)
  • Internal stainless steel hinges reduce potential corrosion points
  • Double-paneled Galvanneal doors for added strength
  • Gas door struts reduce wear-and-tear
  • Rounded door corners throughout reduce effect of load on stress points
  • Flush door panels with bulb seal gasket and functional full-length drip rail for dryer compartments
  • Fully undercoated for rust prevention

Safety and security built in:

  • Fully stable throughout lifting radius of the crane for maximized crane capacity
  • Large, flush-mounted, angled, stop-tail-turn lights for better visibility
  • Four or six heavy-duty tie downs for payload security
  • Three-point latching system provides secure door closures
  • Fender flares add protection to the body at the wheel well
  • Rounded door corners throughout reduce effect of load on stress points
  • Best-in-class Two-Year Limited Warranty

Productivity enhanced:

  • Unobstructed crane compartment maximizes usable cargo space
  • Double-paneled, slam-able tailgate for one hand ease-of-use
  • Complete shelf package to optimize storage needs

Chassis Requirements:

  • Class 4 or 5 (11,200 GVWR; 5080 GVM)
  • 34″ (864 mm) frame rail width
  • Dual rear wheels — 93.75″ (2.38 m) overall width
  • 14,500 lb (6,577 kg) chassis required for cranes in excess of 25,000 ft lb (3.46 tM)
  • Truck stability will govern the actual approved working loads that will apply at different points of rotation
  • Actual chassis requirements should be determined by adding weight of body, crane, accessories, and anticipated cargo

Note: It is the responsibility of the crane installer to comply with OSHA Truck Crane stability requirements as specified by 29 CFR Part 1910.180 (c) (1)


Options:

  • Manual or hydraulic outriggers
  • 12″ (305 mm) heavy-duty bumper
  • 20″ (508 mm) workbench storage bumper
  • Receiver hitch
  • Rope and dome lights for compartments
  • Flood lights
  • Crane boom support
  • Individual drawer units
  • Drop-well for front compartment
  • Slide-out tool tray
  • Adjustable shelving
  • Lockable sliding tops
  • Master locking system
  • Grab handles
  • Oxy/acetylene bottle holder

Substructure:

  • Interlocking channel frame reduces weight while increasing rigidity

titan-interlocking-subframe

• Titan Sales Sheet

• Cabinet Dimensions Table

• Titan 38 Part No. Table

• Titan 38

• TITAN 38 Propane Manual

• Warranty Registration

You may also like…

Log In is required for submitting new question.