8406H

Capacity: 8,400 lb (3,810 kg)
Rating: 50,000 ft lb (6.97 tM); maximum lifting capacity of 8,400 lb (3,810 kg) at 6 ft. (1.83 m)

Features and Benefits of the 8406H Models

  • Automatic overload protection system
    • Keeps people, equipment, and loads safer
  • Full, non-continuous power rotation
    • -370° movement for maximum versatility in lifting
  • Capable of lifting at 100% in all positions on Titan® crane bodies with outriggers
    • Maximized capacity for lifting
  • -14° to +75° boom elevation
    • Greater work area capability with maximum range of working angle limits
  • Small sheave
    • Fits into tighter spaces
Category: Tag:

information

spacer

Features and Benefits of NexStar™ Models

  • Proportional control of multiple functions simultaneously and independently
    • Adjust any function anytime to a different speed, for total control over the load
  • Level sensors monitor the angle of the truck and crane with the NexStar FM remote system on a Titan® crane body
    • Prevents operation in unsafe, unlevel conditions
  • Automatic stop at 100% load capacity
    • Keeps people, equipment, and loads safer
  • Adjustable speed settings; from 25% to 100%
    • Enables fine tuning of speeds for total control over the load
  • The NexStar FM remote system receiver displays load-monitoring and diagnostic readouts in plain English
    • No codes to look-up or memorize; operator views precise percentage load capacity
  • NexStar available with either tethered or fully-featured wireless remote options
    • Your choice for preferred control method
  • Transmitter is IP66 rated and CE certified
    • Sealed and water protected for maximum durability

spacer
Requirements

  • Truck must be equipped with 560142-000 outriggers or equal
  • 20,500 GVWR minimum chassis requirement. (Does not include bodies or accessories)
  • Engine tachometer and throttle control required for proper crane installation

spacer

Control Options:

  • NexStar™ II / FM Remote
  • NexStar™ I / FM Remote
  • Hard-Wired

spacer

Click to enlarge image


 

Specifications

Weight

1,555 lbs (759 kg)

Stowed Boom Length

13′ 4″ (3.97 m)

Extended Boom Length

20′ 4″ (6.2 m)

Width

1′ 11″ (.58 m)

Height

2′ 8.4″ (.82 m)

Base Plate Dimensions

16.75″ x 16.75″ (0.43 m x 0.43 m)

Single Line Speed

60 ft/min (18.3 m/min)

Boom Down

20-28 seconds (full stroke of cylinder)

Boom Retract

18-24 seconds (full stroke of cylinder)

Hydraulic Requirements

13 gpm (49.2 L/min) at 2,750 psi (189.6 bar)

Cable

95 ft (28.95 m) of 3/8″ (9.52 mm) aircraft quality cable

Standards

ANSI B30.5, OSHA 1910.180

Warranty

2 year warranty

• 8406H Tech Sheet

• 8406H Manual

• 8406H-Nexstar-09-12-11-480989010

• 8406H Part No. Table

• Service Cranes Sales Sheet

• Crane Accessories Part No. Table

• Crane Warranty

Log In is required for submitting new question.