Titan 60

Rating: 60,000 ft lb (8.3 tM)
Storage Space: 60″ Standard:
99.14 cu/ft (2.81 cu/m) for 52″ Tall
104.29 cu/ ft (2.95 cu/m) for 58″ Tall
84″ Standard:
121.8 cu/ft (3.45 cu/m)
84″ Tall:
127.2 cu/ft (3.60 cu/m)
Applicable Service Cranes: HC-9, HC-10, HC-12s
Cargo Floor: 50″ (1.27 m)


Category: Tags: , ,


Features / Benefits
Heavy-duty performance and extended service life:

  • Patented one-piece 10 gauge (3.6mm) side-pack design for rugged, offroad use minimizes weld seams for less cracking and rust
  • 12 gauge (2.8mm) tread plate on tops and cargo area for added durability
  • Integral crane box transfers load directly to outriggers reducing stress on the chassis — reinforced up to 60,000 ft lb (8.3 tM)
  • Internal stainless steel hinges reduce potential corrosion points
  • Double-paneled galvanneal doors for added strength
  • Gas shock door closers reduce wear-and-tear
  • Rounded door corners throughout reduce effect of load on stress points
  • Flush door panels with bulb seal gasket and functional full-length drip rail for dryer compartments
  • Fully undercoated for rust prevention


Safety and security built in:

  • Fully stable throughout lifting radius of the crane for maximized crane capacity
  • Large, flush-mounted, angled, stop-tail-turn lights for better visibility
  • Four or six heavy-duty tie downs for payload security
  • Three-point latching system provides secure door closures
  • Fenderettes add protection to the body at the wheel well
  • Rounded door corners throughout reduce effect of load on stress points
  • Best-in-class Two-Year Limited Warranty


Productivity enhanced:

  • Unobstructed crane compartment maximizes usable cargo space
  • Double-paneled, slammable tailgate for one hand ease-of-use
  • Complete shelf package to optimize storage needs


Chassis Requirements:

  • 84″ CA: 26,000 GVWR (11793 GVM)
    120″ CA: 26,000 GVWR (11,793 GVM)
  • 34″ (864 mm) frame rail width and heavy-duty reinforced frame, outriggers only recommended
  • Dual rear wheels — 93.75″ (2.38 m) overall width
  • Maximum tire size 11.00 — 22.50
  • Truck stability will govern the actual approved working loads that will apply at different points of rotation
  • Actual chassis requirements should be determined by adding weight of body, crane, accessories, and anticipated cargo

Note: It is the responsibility of the crane installer to comply with OSHA Truck Crane stability requirements as specified by 29 CFR Part 1910.180 (c) (1)



  • Hydraulic outriggers (single slide with kick-out, PN 560570101 (valve mounted on cross tube) or PN 560570102 (remote valve))
  • 30″ (762 mm) workbench storage bumper
  • Receiver hitch
  • Rope and dome lights for compartments
  • Flood lights
  • Crane boom support
  • Individual drawer units
  • Drop-well for front compartment
  • Slide-out tool tray
  • Adjustable shelving
  • Lockable sliding tops
  • Master locking system
  • Oxy/acetylene bottle holder



  • Interlocking channel frame reduces weight while increasing rigidity


• Titan Sales Sheet

• Cabinet Dimensions Table

• Titan 60 Part No. Table

• Titan 60

• Warranty Registration

Log In is required for submitting new question.